GeNetix GN10 GeNetix GN10

GeNetix Node 10 is a multipurpose node that provides a solution for remote data distribution in a wide variety of applications, notably offering support for Timecode, MIDI and 10Scene.

This universal interface supports Art-Net, sACN, RDM and like all GeNetix nodes is fully configurable from ChamSys consoles, via its in-built web server or via the display on the unit. Its DMX ports are fully configurable, allowing for use as DMX Input or Output and has configurable DMX timings. With two network ports, GeNetix Node 10 can be either PoE or Mains powered via its powerCON TRUE1 line input. This versatile device is at home in many different environments as a standalone interface, truss-mounted in the rig via its M12 receiver or rack mounted via its rack ears.

The interface's LTC and MIDI ports provide both Timecode and MIDI notes input/output to MagicQ systems over ChamNet as well as supporting Art-Net timecode compatible with any system supporting this, making GeNetix Node 10 ideal for applications where the Timecode or MIDI source is away from the console.

When connected to MagicQ PC Systems via USB, GeNetix Node 10 unlocks MagicQ PC Systems in Full Unlocked Mode, acting not only as a DMX interface, but also as a Timecode, MIDI and 10Scene gateway, making the full power of MagicQ software available to systems running on Linux, Mac or PC. When used as an Art-Net/sACN node the GeNetix Node 10 unlocks up to 2 MagicQ Instances via Network.

Contact us for more information


  • 10 RDM DMX Ports supporting Input and Output
  • Supports Art-Net & sACN
  • LTC & MIDI Timecode over Ethernet
  • MIDI Notes over Ethernet
  • Webserver for remote configuration
  • In-built display and encoder for local configuration
  • Full Unlock of MagicQ PC Systems when connected via USB
  • Full Unlock of up to 2 MagicQ Instances when connected via Network

GeNetix Nodes

GeNetix Nodes

GeNetix Nodes provides a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, merging and Scene Storage

Explore GeNetix Nodes

GeNetix Nodes Features

GeNetix Protocols

GeNetix network nodes support industry standard lighting protocols; Art-Net V1,2,3 and 4, sACN - including priorities on a per universe basis and Remote Device Management (RDM).

DMX timings are fully configurable, with refresh rate, break time, frame time and MAB.

DMX Fallback

DMX Fallback enables fixtures on a single universe to be connected in a loop to two ports on the GeNetix node for redundancy. If a single cable is broken anywhere in the DMX loop, all fixtures can still receive DMX.

Individual ports can be set to Output, Input or Fallback.

DMX Fallback is supported within a GeNetix node and also between multiple GeNetix nodes.


GeNetix nodes support storage of 10 Scenes that can be recorded from the incoming Art-Net or sACN data. Scenes contain DMX data for one or more ports on the node.

Scenes can be replayed from either the node front panel, from the MagicQ / QuickQ Console, via the webserver or via 10Scene wall plates on the GN5 & GN10 Nodes.

Node Configuration

The GeNetix network nodes can be configured from MagicQ consoles and PC systems and from QuickQ consoles. They can also all be configured from a web server. The nodes with a front panel can also be configured from the front panel.

GeNetix nodes also support a lock PIN to prevent the configuration being modified from the front panel of the GeNetix

Lost Data Behaviour

GeNetix Nodes support 3 modes for when the node loses network data (Art-Net or sACN)

Hold – Holds the last output DMX values

None – Stops outputting DMX

Zeroes – Outputs DMX 0's on all channels

DMX synchronisation

GeNetix nodes support synchronised DMX output to reduce tearing. Synchronisation is controlled via ChamNet and is available when used with MagicQ consoles.

Download PDF Cut Sheet

Hardware Specifications:

  • RDM Direct DMX Ports: 10
  • Network Ports: 2
  • MIDI Ports: 2 (1 in, 1 out)
  • LTC Timecode Ports: 2 (1 in, 1 out)
  • 10Scene Ports: 1
  • PoE Input: Yes (Port 1)
  • USB Ports: 1 USB-C
  • Kensington Security Lock Fixing: Yes
  • Power Input, Neutrik powerCON TRUE1 110 to 240 VAC

Software Specifications:

  • Art-Net/sACN: Yes
  • ChamNet Support: Yes
  • LTC & MIDI Timecode over ChamNet: Yes
  • MIDI Notes over ChamNet: Yes
  • 10Scene Gateway Functionality: Yes
  • Configurable DMX Timings: Yes
  • Web Server: Yes
  • DMX Redundancy Support: Yes
  • User Scene Store: Yes

Included Accessories:

  • Neutrik powerCON TRUE1 Power Cable: 1
  • Quick Start Guide: 1
  • 10Scene Connector: 1
  • Set of Rubber Feet: 1

Node Weights and Dimensions:

  • Width: 480mm (18.9 inches)
  • Depth: 218mm (8.59 inches)
  • Height: 44.4mm (1.75 inches)
  • Weight: 2.75 KG (6.06 lb)

Coming Soon

GeNetix Firmware

GeNetix simplifies data distribution with a complete range of Nodes, Gateways, Switches and PoE devices. Branch out with these adaptable extensions of our growing family of intuitive networking devices.

Download Latest Firmware