GeNetix GW2O GeNetix GW2O
GeNetix Wall Mount Node 2 is a two-port wall mount PoE powered node, available to fit into standard single gang EU/US & UK backboxes. Available with either male or female physical RDM Direct DMX ports, both versions support both DMX Input or Output. GeNetix Wall Mount Node 2 is ideal for any fixed installation, supporting Art-Net and sACN and configurable from ChamSys consoles, via its in-built web server or over Art-Net.
Overview:
- 2 RDM DMX Ports supporting Input and Output
- Available with either Male or Female DMX Ports
- Supports Art-Net & sACN
- Webserver for remote configuration
- PoE Powered
- Supplied with interchangeable Black or White faceplates
- Available to fit US,UK,EU Standard Single Gang Back Box fit
- Does not unlock ‘demo mode’ on MagicQ PC Systems
GeNetix Nodes
GeNetix Nodes provides a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, merging and Scene Storage
Explore GeNetix Nodes
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/GNNodes.png?v=1705270000)
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/sACN_RDM_Ethernet.png?v=1705663685)
GeNetix Protocols
GeNetix network nodes support industry standard lighting protocols; Art-Net V1,2,3 and 4, sACN - including priorities on a per universe basis and Remote Device Management (RDM).
DMX timings are fully configurable, with refresh rate, break time, frame time and MAB.
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/DMX-Fallback.png?v=1705585762)
DMX Fallback
DMX Fallback enables fixtures on a single universe to be connected in a loop to two ports on the GeNetix node for redundancy. If a single cable is broken anywhere in the DMX loop, all fixtures can still receive DMX.
Individual ports can be set to Output, Input or Fallback.
DMX Fallback is supported within a GeNetix node and also between multiple GeNetix nodes.
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/GNX-Scenes.png?v=1705654345)
Scenes
GeNetix nodes support storage of 10 Scenes that can be recorded from the incoming Art-Net or sACN data. Scenes contain DMX data for one or more ports on the node.
Scenes can be replayed from either the node front panel, from the MagicQ / QuickQ Console, via the webserver or via 10Scene wall plates on the GN5 & GN10 Nodes.
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/Node-Config.png?v=1705585763)
Node Configuration
The GeNetix network nodes can be configured from MagicQ consoles and PC systems and from QuickQ consoles. They can also all be configured from a web server. The nodes with a front panel can also be configured from the front panel.
GeNetix nodes also support a lock PIN to prevent the configuration being modified from the front panel of the GeNetix
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/Lost-Data-Behaviour.png?v=1705671456)
Lost Data Behaviour
GeNetix Nodes support 3 modes for when the node loses network data (Art-Net or sACN)
Hold – holds the last output DMX values
None – stops outputting DMX
Zeroes – Outputs DMX 0's on all channels
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/DMX_Sync.png?v=1705585762)
DMX synchronisation
GeNetix nodes support synchronised DMX output to reduce tearing. Synchronisation is controlled via ChamNet and is available when used with MagicQ consoles.
Hardware Specifications:
- RDM Direct DMX Ports: 2
- Network Ports: 1 (punchdown connector)
- PoE Powered: Yes
- Available in variants to fit U.K., E.U. & U.S.A single gang box boxes.
- Available with either Male or Female DMX Ports
- Supplied with interchangeable Black or White faceplates
Software Specifications:
- Art-Net/sACN: Yes
- ChamNet Support: Yes
- Configurable DMX Timings: Yes
- Web Server: Yes
- DMX Redundancy Support: Yes
- Unlock's ‘demo mode’ MagicQ PC Systems: No
Included Accessories:
- Black and White Face Plates
EU Version Weights and Dimensions:
- Width: 80mm (3.14 inches)
- Depth: 37.5mm (1.48 inches)
- Height: 80mm (3.14 inches)
- Weight: 0.15KG (0.33lb)
UK Version Weights and Dimensions:
- Width: 86mm (3.38 inches)
- Depth: 37.5mm (1.48 inches)
- Height: 86mm (3.38” inches)
- Weight: 0.15KG (0.33lb)
US Version Weights and Dimensions:
- Width: 70mm (2.76 inches)
- Depth: 37.5mm (1.48 inches)
- Height: 115mm (4.53 inches))
- Weight: 0.15KG (0.33lb)