GeNetix GN2 GeNetix GN2
GeNetix Node 2 is a two-port Ethernet-DMX node that is compatible with any console supporting Art-Net and sACN. GeNetix Node 2 can also be used as a USB interface for MagicQ PC systems, unlocking MagicQ into reduced mode when connected via its USB-C or Network port.
Configuration is simple, whether done locally via its in-built display, remotely with its onboard web server or from the console. Powered by either PoE or its USB-C port, this versatile device is at home in many different environments as a standalone interface, truss-mounted in the rig via its M12 receiver or installed via its DIN rail mount.
GeNetix Node 2 supports Art-Net, sACN, RDM and supports both DMX input or output from its two DMX ports.
Overview:
- 2 RDM DMX Ports supporting Input and Output
- Supports Art-Net & sACN
- Webserver for remote configuration
- In-built display and encoder for local configuration
- Can be USB or PoE powered
- Unlocks MagicQ PC Systems into Reduced Mode via either USB or Network
GeNetix Nodes
GeNetix Nodes provides a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, merging and Scene Storage
Explore GeNetix Nodes
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/GNNodes.png?v=1705270000)
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/sACN_RDM_Ethernet.png?v=1705663685)
GeNetix Protocols
GeNetix network nodes support industry standard lighting protocols; Art-Net V1,2,3 and 4, sACN - including priorities on a per universe basis and Remote Device Management (RDM).
DMX timings are fully configurable, with refresh rate, break time, frame time and MAB.
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/DMX-Fallback.png?v=1705585762)
DMX Fallback
DMX Fallback enables fixtures on a single universe to be connected in a loop to two ports on the GeNetix node for redundancy. If a single cable is broken anywhere in the DMX loop, all fixtures can still receive DMX.
Individual ports can be set to Output, Input or Fallback.
DMX Fallback is supported within a GeNetix node and also between multiple GeNetix nodes.
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/GNX-Scenes.png?v=1705654345)
Scenes
GeNetix nodes support storage of 10 Scenes that can be recorded from the incoming Art-Net or sACN data. Scenes contain DMX data for one or more ports on the node.
Scenes can be replayed from either the node front panel, from the MagicQ / QuickQ Console, via the webserver or via 10Scene wall plates on the GN5 & GN10 Nodes.
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/Node-Config.png?v=1705585763)
Node Configuration
The GeNetix network nodes can be configured from MagicQ consoles and PC systems and from QuickQ consoles. They can also all be configured from a web server. The nodes with a front panel can also be configured from the front panel.
GeNetix nodes also support a lock PIN to prevent the configuration being modified from the front panel of the GeNetix
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/Lost-Data-Behaviour.png?v=1705671456)
Lost Data Behaviour
GeNetix Nodes support 3 modes for when the node loses network data (Art-Net or sACN)
Hold – holds the last output DMX values
None – stops outputting DMX
Zeroes – Outputs DMX 0's on all channels
![](https://cdn.shopify.com/s/files/1/0009/6416/5668/files/DMX_Sync.png?v=1705585762)
DMX synchronisation
GeNetix nodes support synchronised DMX output to reduce tearing. Synchronisation is controlled via ChamNet and is available when used with MagicQ consoles.
Hardware Specifications:
- RDM Direct DMX Ports: 2
- Network Ports: 1
- PoE Input: Yes (Port 1)
- USB Ports: 1 USB-C
- Kensington Security Lock Fixing: Yes
Software Specifications:
- Art-Net/sACN: Yes
- ChamNet Support: Yes
- Configurable DMX Timings: Yes
- Web Server: Yes
- DMX Redundancy Support: Yes
- User Scene Store: Yes
Included Accessories:
- DIN Rail Mount Clip: 1
- USB A-C Cable: 1
Node Weights and Dimensions:
- Width: 125mm (4.92 inches)
- Depth: 133mm (5.23 inches)
- Height: 44mm (1.73 inches)
- Weight: 0.85 KG (1.87 lb)